Sony SRF-86 - Manual (Page 2)

2
D
1
A side
Pull
2
1 A side
B side
3 4
E
1
2
1 2
B side
A side
Lower side
Upper side
Pull
Upper side
Lower side
F
G
H
1
Lower side
2
B side
3
A side
B side
I
1
Upper side
Before attaching to
your hand or arm
When you use the unit while doing
sports, use the arm band to attach the
unit to your hand or arm.
Threading the arm band
to the mount
(See Fig. D)
1 Thread the arm band to the
lower side of the mount. The
arm band which has Velcro
tape must be above.
2 Thread the A side to the upper
side of the mount.
3 Attach the A side to the band
1
and pull the band 2 to
extend the loop.
4 Attach the B side to the A side.
Connecting the mount to
the unit
(See Fig. E)
1 Connect the mount that is
attached the arm band to the
knob of the unit.
2 Fasten the shaft using a coin.
Adjusting the length of
the band
(See Fig. F)
1 Detach the B side from the A
side.
2 Extend the loop to be able to
insert your hand or arm.
To adjust more tightly (or
loosely)
(See Fig. G)
Change the position of the A side and
reattach to the band.
Attaching to your
hand
(See Fig. H)
1 Put your hand into the loop.
2 Pull the B side.
3 Attach the B side to the A side.
A side
Upper side Lower side
A side
Upper
side
Lower
side
Velcro tape
Mount
4 3
A side
B side
2
B side
Attaching to your
arm
(See Fig. I)
1 Put your arm into the loop.
2 Pull the B side.
3 Attach the B side to the A side.
4 Rotate the unit.