ADT Security Services D9412 - Manual (Page 3)

ACCESS LEVEL CONTROL
Description
Use this function to manually enable/disable access authority levels assigned to users. This function can be used to
temporarily disable a user’s access level instead of deleting and adding the user.
Using Access Level Control
1. Ensure the display shows idle disarmed text.
2. Press the MENU key to enter the Function List, then press NEXT repeatedly until you reach the CHANGE
LEVEL CTL? prompt. Press ENT.
3. ACCESS LEVEL CTL is displayed to remind you that you are affecting the authority levels of cards/tokens and
not passcodes. Press ENT.
4. ENTER LEVEL: is displayed. Enter the access authority level number and press ENT.
5. If the access level is currently disabled, LEVEL # ENABLE? is displayed. If the access level is currently
enabled, LEVEL # DISABLE? is displayed. Press ENT to accept the choice. ENTER LEVEL: is displayed
again. When you are finished, press ESC.
33267D 12/97
D9412/D7412 Owner’s Manual Supplement
Page 3
q
I have this feature.
q
I do not have this feature.