Amana ACS7280A - Manual (Page 14)

14
Timer Signal
When time elapses, timer beeps
3 times then approximately once
every 6-10 seconds until
TIMER ON/OFF pad is pressed.
Preheat Signal
After setting oven to bake and
selecting a temperature, oven
preheats. When oven reaches set
temperature, 1-second signal
sounds.
End-of-Cycle Signal
When a timed cooking cycle is
complete, three long signals sound.
End-of-cycle signal continues to
sound every 10 seconds for
5 minutes or until OVEN CANCEL
pad is pressed. There is no end of
cycle signal for self-clean.
Display and Signals
Displays
time-of-day,
timer and timed
or delayed
settings.
Displays
temperature
and cooking
method or
function for
oven.
8888 8 8 8
BROIL CONV
DELAY BAKE
CLEAN LOCKED
CLEAN OVEN CLN STOP TIMER
HR :
O
N
8888 8 8 8
BROIL CONV
DELAY BAKE
CLEAN LOCKED
DELAY BAKE CLN STOP TIMER
HR
O
N
:
DISPLAYS DESCRIPTION
7,0( or +5
7,0( flashes in display while current time of day is
entered.
7,0( +5 flashes when time is entered for
timed or delayed baking, or delayed self-cleaning.
7,0(5
Flashes in display while timer is set.
7,0(5 stops
flashing and displays while time counts down.
%$.(
%$.( flashes while bake oven temperature is
entered. A preheat signal will sound when oven
cavity has reached the set temperature.
%$.(
displays during baking cycle.
21
Displays when oven is heating.
7,0( %$.(
Flashes, then displays when a timed baking cycle
is set.
'(/$< %$.(
'(/$< &219 RU
'(/$< &/($1
Displays when delayed bake, delayed convection
or delayed self-clean cycle is set.
&219
Displays when convection cycle is selected.
6723
Displays when setting the stop time for a delayed
baking or self-clean cycle.
%52,/ Flashes, then displays when a broil is set.
&/($1 Displays when self-clean cycle is entered and set.
/2&.('
/2&.(' flashes while oven door is locking or
unlocking and remains in display while door is
locked. After cycle is complete and oven has cooled
to a safe temperature,
/2&.(' no longer displays
and door can be opened.