Amana ACS7280A - Manual (Page 13)

13
Using the Oven Control
(cont'd)
How Long Should the
Self-Clean Cycle Last?
The self-clean cycle can be set from
2 to 4 hours. Minimum recommended
cleaning time is 3 hours. After the
self-clean cycle ends, the oven must
cool before the oven door can be
opened. When the LOCKED light no
longer glows in the display, you can
safely open the oven door. DO NOT
force the oven door open while the
LOCKED light shows in the display.
The oven door lock can be damaged.
Do I need to prepare?
To get the best results from the
self-clean cycle, follow these steps:
• Remove birds or animals
susceptible to smoke or other
fumes from the room or
adjoining room.
• Make sure oven light cover is
properly in place. Do not use
cleaning cycle if it is not.
• Remove oven racks and all
cooking utensils from oven.
• Clean excess spills from oven
interior.
• Remove items from range top
and backguard. These areas can
become hot during self-cleaning
cycle.
Self-cleaning
Self-clean feature uses high oven temperature to clean oven interior.
1. Prepare oven for self-cleaning (see below right).
2. Press CLEAN pad.
3. Press MORE or LESS pads to adjust cleaning time.
• Oven begins self-cleaning cycle approximately 5
seconds after input
• LOCKED flashes in display when automatic door
latch is locking
• LOCKED displays during self-clean cycle
• When oven has cooled to a safe temperature, the LOCKED light
flashes while the door latch opens. When oven has cooled
enough to open, LOCKED light no longer displays and door can
be opened
• No signal sounds at end of self clean cycle
WARNING !
To avoid risk of personal injury, do
not touch oven vents or area
around vents during self-cleaning.
These areas can become hot
enough to cause burns.
CAUTION !
To avoid fire or smoke damage,
remove any flammable materials
from storage drawer. Items like
plastic containers and paper
manuals can melt or burn.
CAUTION !
To avoid risk of fire or smoke
damage, clean excess spills
before starting Self Clean.
Delayed Self-clean Cycle
Self-clean feature uses high oven temperature to clean oven interior. Set
oven to begin and end cleaning at later time. Range control calculates
start time based on cycle length and stop time.
1. Prepare oven for self-cleaning (see right).
2. Press CLEAN pad.
3. Press MORE or LESS pads until desired amount of
cleaning time is displayed.
4. Press STOP TIME pad.
5. Press MORE or LESS pads until desired stopping
time appears in display.
• Starting time is automatically calculated based on amount of
cleaning time and stop time
• Oven begins self-clean cycle
• LOCKED flashes when automatic door
latch is locking
• LOCKED displays during self-clean cycle
• When oven has cooled to a safe temperature, the
LOCKED light flashes while the door latch opens.
When oven has cooled enough to open, the
LOCKED light no longer displays and door can
be opened
• No signal sounds at end of self-clean cycle
-
Interrupt Self-Clean
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe
temperature LOCKED light will
flash in display, door will unlock
and can be opened. DO NOT
force door. This can cause
damage to the latch.