Answering system settings – AT&T TL96471 User Manual
Page 23

22
Answering system settings
Record your own announcement
Using a handset or the telephone base:
Press
MENU
on the handset in idle mode to enter the
main menu.
Press
CID or DIR on the handset, or
CID
or
DIR
on the telephone base
to scroll to
Answering sys, then
press
SELECT
.
Press
SELECT
again to select
Announcement.
The screen displays
ANNOUNCEMENT. The handset
announces, “Announcement, press
PLAY
or
RECORD
.”
Press
RECORD
.
The telephone announces, “Record after the tone.
Press
STOP when you are done.” After the tone,
speak towards the microphone of the handset or
telephone base.
Press
STOP
when you finish recording.
The telephone automatically plays back the newly
recorded announcement. Press
STOP
to stop the
playback at any time. After the announcement playback, press
PLAY
to
replay the recorded announcement, or
RECORD
to record again if desired.
NOTES:
Your announcement can be up to 0 seconds in length.
Announcements shorter than two seconds are not recorded.
.
2.
.
4.
5.
6.
.
•
•
Recording
announcement...
STOP
Announcement
playback
DELETE STOP
Announcement
playback
DELETE STOP
Recording
announcement...
STOP