Bluetooth setup – AT&T TL96471 User Manual
Page 17

6
Bluetooth setup
Bluetooth wireless technology operates within a short range (up to 0 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 5 feet of the telephone base for optimal
performance.
Add a cell phone
To pair and connect a cell phone:
Press
MENU
on the telephone base in idle mode to
enter the main menu.
Press
CID
or
DIR to highlight Bluetooth, then
press
SELECT
.
Press
SELECT
to choose
Add device.
Press
CID
or
DIR to highlight Add cellular, then
press
SELECT
. The screen displays
Please wait...
followed
by 1. If cell is connected to BT device,
please disconnect it.
Press
NEXT
. The screen displays
2. Place cell phone
next to base.
Press
NEXT
to turn on the telephone base
discoverable mode. The screen displays
Set cell to
search base: AT&T DECT 6.0 discoverable PIN: 0000.
Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices.
Your cell phone may require a passcode. In this case
the handset screen displays
Check cellular. ENTER
PASS CODE. Enter the cell phone passcode into the
handset and press
SET
to save.
Enter the PIN of the telephone base (the default PIN
is
0000) into your cell phone to continue the pairing
process. The handset displays
Adding Cell Phone A to
device list...
When a device is successfully connected, the
telephone base displays
Cell Phone A is added and
connected to base. You hear a confirmation tone.
The corresponding status icon (
1 or 2) displays.
The corresponding device light on the telephone base
(
DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your cell phone, it may not be compatible with
your
TL96271/TL96371/TL96471
. Check the Bluetooth compatibility list
at
www.telephones.att.com
.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your
TL96271/TL96371/TL96471
to
complete the pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
.
2.
.
4.
5.
6.
.
.
.
•
•
•
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
Directory
Caller ID log
Intercom
Bluetooth
BACK SELECT
ADD DEVICE
Add cellular
Add headset
BACK SELECT
Set cell to
search base:
AT&T DECT 6.0
discoverable
PIN:0000
Adding
Cell Phone A
to device
list...
Cell Phone A
is added
and connected
to base.