Sony D-NS921F - Manual (Page 39)

39
-GB
CD player
Symptom
The CD does not play or
“No disc” appears in the
display when a CD is placed
in the CD player.
“HOLD” flashes on the
display when you press a
button, and the CD does not
play.
The CD player does not start
charging.
Playback starts from the point
you stopped. (resume
function)
Rustling noise is heard from
the CD.
When using with a connected
stereo system, the sound is
distorted or noisy.
Cause and/or corrective actions
c The buttons are locked. Slide the HOLD switch back. (page 31)
c The CD is dirty or defective.
c Check that the CD is inserted with the label side up. (page 12)
c Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
c Close the lid of the battery compartment firmly. (page 33)
c Make sure the batteries are inserted correctly. (page 33)
c Connect the AC power adaptor to an AC outlet securely. (page 12)
c Push the 4-way control key toward u after one second or more
has passed since the AC power adaptor was connected.
c The CD-R/RW is blank.
c There is a problem with the quality of the CD-R/RW, recording
device, or application software.
c Files in two or more formats have been recorded on the CD-R/RW.
(pages 6, 7)
c The buttons are locked. Slide the HOLD switch back. (page 31)
c While the CD player is stopped, push the 4-way control key toward
x•CHG (RADIO OFF). (page 33)
c The resume function is working. To start play from the first track,
push the 4-way control key toward u during stop until the first
track starts playing, or open the lid of the CD player. Or remove all
power sources, then insert the batteries or connect the AC power
adaptor again.
(pages 12, 13, 33)
c Close the lid of the battery compartment firmly. (page 33)
c Adjust the volume of the CD player and the connected device. (page
32)
Additional information (Continued)