Sony ICD-UX80 - Manual (Page 12)

ICD-UX60/UX70/UX80 GB 3-283-648-11(1)
1
GB
Connecting the IC recorder
to your computer
You can transfer the IC recorder data
onto your computer by connecting the
IC recorder to the computer.
Remove the USB cap from the IC recorder
and then connect the IC recorder to the
USB connector of your computer.
The IC recorder is recognized by the
computer as soon as the connection is
made. While the IC recorder is connected
to the computer, “CONNECTING” is
displayed in the display window of the
IC recorder.
To USB connector
IC recorder
Computer
Tip
If the IC recorder cannot be connected to the
USB connector of your computer directly, use
the supplied USB connection support cable.
USB connection
support cable
(supplied)
