Apple eMac ATI Graphics (Memory Replacement) - Manual (Page 7)

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 7
Closing the User Access Door
1. Replace the screw on the user access panel. (Figure 7)
Figure 7
2. Carefully turn the computer right side up.
3. Reconnect the power cable. Important: When connecting the power cord, first plug
the cord into your eMac, then plug the other end into an electrical outlet or power strip.
4. Press the power button to restart your computer.
Warning: Never turn on the computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage your computer or cause injury.