Audiovox D2017 User Manual

Page 18

N. Setup

1. General Setup Page
1)With no disc inside the player, press

‘SETUP’ to display the Main screen

of the Setup Menu on the screen and

“General Setup Page” appears. At

the same time,

“

” is highlighted. Press ‘SETUP’ again to exit the

Setup Menu.
2) Press the

buttons to select the other menus in general

setup page.
3) With

“TV Display” highlighted press the ENTER button.

4) Press

to enter the sub menu.

5) Press the

button to select the desired option in the sub

menu and press the ENTER to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press

to return the previous menu.

a) TV Display

* Normal/PS: When the player outputs signal to a normal TV, a nor-

mal picture is shown on the full screen.

* Normal/LB: When the player outputs signal to a normal TV, a nor-

mal picture is shown on the screen with a black strip at both the top
and bottom of the screen.

* Wide: When the player outputs signal to a wide screen TV, a

wide picture is shown on the full screen.

b) Angle Mark

*On: Allows access to the angle feature if contained on the DVD.
*Off: The unit will not display the angle mark feature.

NOTE: Not all discs contain above features. The above features are

disc dependent.

b) Screen Saver

*On: Enables screen saver
*Off: Disables screen saver

*NOTE: The DVD player will enter the Screen Saver mode after ap-
proximately three minutes if the same image remains on the screen.

PDF created with FinePrint pdfFactory Pro trial version

http://www.fineprint.com