Actiontec electronic HCB1000 - Manual (Page 2)

Creative Solutions for the Digital Life ™
HPNA Adapter
Technical Specifications Package Contents
• Ethernet to Coax HPNA Adapter
• Power adapter
• Quick Start Guide
• Ethernet Cable
Corporate Office
760 N. Mary Avenue, Sunnyvale, CA 94085
Main: (408) 752-7700
Sales Info: (800) 797-7001
Fax: (408) 541-9003 Tech Support: (888) 436-0657
Tech Support Fax: (719) 522-9421
Internet: www.actiontec.com
© 2010 Actiontec Electronics, Inc.
Actiontec, Actiontec Installation Buddy, Creative Solutions for the Digital Life, and the Actiontec
logo are registered trademarks or trademarks of Actiontec Electronics, Inc. Incorporated in the
U.S. or other countries. All other names are properties of their respective owners.
Product photo may differ from actual product, however functionality remains as stated above.
Specifications are subject to change without notice.
DS960/0508
Features
Interface Ports
Front Panel
LED Function
Enclosure physical
dimensions
Ethernet Ports
Power
Requirements
Environmental
Operating Range
Required
Regulatory
Approvals and
Compliance
Descriptions
• Two Type F ports for the HPNA Coaxial cable and a
Set-top Box
• Two RJ-45 ports 10/100Base-T Ethernet LAN
• One power port
• Eight visual indicators: Ethernet(2), SYNC, HPNA,
PC/LAN, STB/MODEM, POWER, STB/TV
SYNC
Solid Green: HPNA host is detected
Off: Power off , HPNA host is not detected
HPNA
Solid Green: HPNA link is established
Off: Power off , HPNA link is not established
PC/LAN
Solid Green: Ethernet link is established on the PC/LAN port
Off: Ethernet link is disconnected or device power off
STB/MODEM
Solid Green: Ethernet link is established on the
STB/MODEM port
Off: Ethernet link is disconnected or device power off
Power
Solid Green: Power is being applied to bridge
Solid Red: Bridge malfunctions or Power fail
Off: Power off
STB/TV
Type F connector connects to a set-top
Length: 5 inch
Width: 3 inch
Height: 1 inch
• Compliant with IEEE 802.3 and IEEE 802.3u.
• Supports Auto-MDIX.
• Dual 10/100 RJ-45 Ethernet ports to support multiple
IP devices per bridge including PCs and DSL modems
• Operating voltage: +5V +/- 10%
• Power Dissipation: 5V DC @ 1000 mA (Max)
• Operating temperature: -5~50 degrees Celsius
• Humidity: 8-95%, non-condensing
• EMI/Immunity: FCC part 15 Class B
• UL