Asus Wireless Dual-band PCI-E Card PCE-N53 - Manual (Page 16)

PCE-N53 Wireless Dual-band Card Manual
13 ASUS Wireless Dual-band Card
2. Click General table and then click
ICS to enable ICS. The General table
displays the wireless clients that are
currently connecting to the Soft AP.
3. Select a network(station) from the
available networks list, then click
Apply.
To switch to the Soft AP mode:
1. Click
AP to switch to the Soft AP
mode.
3.3 Soft AP mode (Windows ® XP/Vista/7)
The ASUS PCE-N53 WLAN Card supports the Soft AP mode. In this mode, the
WLAN card acts as a virtual AP.
The picture indicates that your WLAN
card has switched to the Soft AP
mode successfully.
• The ASUS Wireless Dual-band
Card Setting Utility icon in the
system tray switches to the ASUS
Wireless Access Point Utility icon .
IMPORTANT: Before configuring the Soft AP mode, connect your computer to a
wired network to provide network access for your wireless clients.