Asus Wireless Dual-band PCI-E Card PCE-N53 - Manual (Page 14)

PCE-N53 Wireless Dual-band Card Manual
11 ASUS Wireless Dual-band Card
3.2 Connecting to a wireless network using WPS
The ASUS PCE-N53 WLAN Card supports the WPS function that helps you set up
a secure wireless network easily.
To connect PCE-N53 to a WPS-enabled AP or station using the WPS push button:
IMPORTANT: Ensure that the AP or station you are trying to connect to
supports the WPS function.
2. Select Use the WPS button, then
click Next.
3. Press the WPS button on the AP
or station to establish a wireless
connection. The picture indicates that
WPS is scanning for the network.
4. Click Finish. The picture indicates
that your WLAN card has connected
to the network successfully.
1. Click the WPS tab.