beautypg.com

Sony CDX-GT310 User Manual

Page 7

background image

7

K SEEK –/+ buttons

CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).

L Receptor for the card remote

commander

M MODE button 8, 12

To select the radio band (FM/MW/LW);
select the unit*

2

.

N DSPL (display)/DIM (dimmer) button

8, 9
To change display items (press); change the
display brightness (press and hold).

O RESET button (located behind the front

panel) 4

P Number buttons

CD/MD*

1

:

(1)/(2): ALBM –/+*

3

*

4

To skip albums (press); skip albums
continuously (press and hold).

(3): REP 8
(4): SHUF 8
(6): PAUSE*

5

To pause playback. To cancel, press
again.

Radio:
To receive stored stations (press); store
stations (press and hold).

Q AF (Alternative Frequencies)/TA

(Traffic Announcement) button 9
To set AF and TA in RDS.

The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).

qk < (.)/, (>) buttons

To control CD/radio, the same as (SEEK)

–/+ on the unit.

ql VOL (volume) +/– button

To adjust volume.

w; ATT (attenuate) button

To attenuate the sound. To cancel, press
again.

wa SEL (select) button

The same as the select button on the unit.

ws M (+)/m (–) buttons

To control CD, the same as (1)/(2)

(ALBM –/+) on the unit.

wd SCRL (scroll) button 8

To scroll the display item.

wf Number buttons

To receive stored stations (press); store
stations (press and hold).

*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an MP3/WMA is played.
*4 If the changer is connected, the operation is

different, see page 13.

*5 When playing back on this unit.

Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.

Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 15
.