Sony CDX-C810DSP - Manual (Page 7)

7
Actual total number: Sony CDX-C810DSP ( E ,F,G,I) 3-856-118-11(2)
EN
3
Press (4) (n) repeatedly until the
desired programme appears.
Programme 1 playback
µ
Programme 2 playback
µ
Programmes 1 and 2 playback
µ
Normal playback
Programme Play starts.
To go back to the normal playback mode,
select “PGM OFF” in step 3 above.
Note
“NO Data” appears in the display if no track is stored in
the programme.
Erasing the entire programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
2
Press (1) (N) repeatedly until “DEL”
appears.
To delete Programme 2, press (4) (n)
repeatedly until “PGM 2” appears.
3
Press (5) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
CD Player
Adding tracks to the programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1 ” shows Programme 1 is selected.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
continue to next page n
SUR EQ
PLAY MODE
PGM
PGM 1
C D
1
SUR EQ
PLAY MODE
PGM
PGM 2
C D
2
SUR EQ
PLAY MODE
PGM
PGM 1+2
C D
1+2
SUR EQ
PLAY MODE ENTER
TRACK
7 P1.‚8
C D
SUR EQ
PLAY MODE ENTER
--PGM1--
D E L
SUR EQ
PLAY MODE ENTER
NO Data
P 1
SUR EQ
PLAY MODE ENTER
TRACK
4 P1.‚3
C D
SUR EQ
PLAY MODE ENTER
TRACK
2 P1.‚2
C D
Track slot number
SUR EQ
PLAY MODE
PGM OFF
C D