Adder Technology 2XPRO - Manual (Page 27)

SmartView XPro Installation and Use Page 26
Type of mouse / system Driver type Likely expected Suggested
Connected at bootup data format restoration
PS/2 PS/2 only PS/2 Standard
PS/2 IntelliMouse PS/2 Standard
IntelliMouse / SmartView PS/2 only PS/2 Standard
IntelliMouse / SmartView IntelliMouse IntelliMouse IntelliMouse
To restore lost mouse movement on a CPU connected to the SmartView:
1) Select the CPU that has lost its mouse movement
2) Activate the on-screen menu using the keyboard hotkeys
3) Press F1 to view additional menus
4) Select the FUNCTIONS menu
5) Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE
6) Exit the on-screen menu
2.10 Connecting the AdderLink Extender
Connecting an AdderLink receiver to the SmartView's integrated AdderLink
extender
If you are connecting an AdderLink XR receiver to one of the SmartView's integrated
AdderLink extender ports then no further configuration is necessary. Remember that
the AdderLink uses proprietary analogue signalling and the cable may not be
connected to a network hub or switch.
Connecting an external AdderLink extender
If you require more remote access links than are provided by the integrated
extender ports you may connect external AdderLink extenders (i.e. an XR / XL
receiver / transmitter pair) to the SmartView's local KVM connectors. If you do this
then you should power the AdderLink XL units using the optional power adapters.
AdderLink requirements
Your AdderLink Extender unit will need to be fitted with firmware version 1.07 or
higher if it is a Gold model or 2.07 or higher if it is a non-Gold model. If you have an
earlier AdderLink unit please contact Adder technical support for advice.