Make video settings with the locationfree player – Sony LF-PK1 User Manual

Page 19

LF-PK1 2-893-070-

11(1)

15 (GB)

Make Video Settings with the

LocationFree Player

■

Conﬁgure the on-screen remote control

for video

(For the connection to external devices in STEP 1
on page 8)

Click anywhere inside the window, and then

click [Settings] at the bottom right of the

window.

[Settings]

 Tip

[Settings] at the bottom right of the window appears only
when you are connected to the Base Station. When you are
not connected, click [Connect] at the bottom left, select the
Base Station you want to set up from the list that appears, click
[Properties], and then click [Video Settings].

Select [Video Settings], [Remote Settings],

and then [Video 1] or [Video 2], then select

the make and type of the connected external

device.

 Tip

You can also use “Additional Remote Control Data”
downloadable from the LocationFree Support website at
http://www.sony.net/Products/LocationFree/support/.
If you cannot ﬁnd the on-screen remote control data of your
external device in the current [Remote Settings] list, try above.

[Power] Select the make.

Select

the type.

If the conﬁguration above is correct, each time you click
[Power], your external device should turn on or off.*

* After clicking [Power], it takes ﬁve seconds or more for the

external device to respond. If it does not respond, make sure

that the make and type are correct, and then try again.

Continued