Sony KDL-22PX300 - Manual (Page 34)

34 Connecting to a network
You can enjoy online games by connecting the PlayStation
TM
2 to a
broadband network. To play all online games, you will need the following:
• A network compatible PlayStation
TM 2 game
• Broadband Internet service
• A commercially available Ethernet cable
• A memory card (8MB) (for PlayStation
TM
2) (sold separately)
Hints
• You cannot play online games using a dial-up or ISDN connection.
• USB connectivity from the External Network Device to the USB connector is not
supported.
• There are two types of Ethernet cables: straight-through cable and crossover cable.
Ensure that you use the correct type of cable when connecting the PlayStation TM 2
to your Broadband Internet connection. Refer to the instructions supplied with the
network device, or your Broadband Internet Service Provider for details.
• Do not connect to the TV LAN using the Ethernet cable.
You can connect the built-in PlayStation
TM
2 to a network using an Ethernet
cable connected to the NETWORK connector on the rear. You can connect
to a 100 Base-TX or 10 Base-T network. Refer to the instructions supplied
with the network device for details.
Basic Network Setup
Network line: This will vary depending on the type of broadband service
in your home.
Network equipment: The type of equipment used will also vary
depending on the type of service.
Hint
When connecting the built-in PlayStation TM 2 and a PC to the network, a network
device such as a router or a hub may be required. Refer to the instructions supplied
with the network device for details.
Networking
Connecting to a network
Connecting with an Ethernet cable
Network line
Network equipment Ethernet cable
(not supplied)
Broadband modem,
router etc.
PC