Karcher NT 48-1 Professional - Manual (Page 9)

– 3
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
 Empty the dirt container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Illustration

Store the suction pipes, the suction
hose and the mains cable as shown in
the illustration.
 Place the appliance in a dry room and
secure it from unauthorized use.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Illustration

Transport the appliance as shown in the
illustration.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
ƽ
Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Loosen the mounting nuts
 Remove the cartridge filter.
 Insert the new cartridge filter.
 Insert the fastening nut and tighten it.
 Insert and lock the suction head.
ƽ
Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
 Turn on the appliance.
– Float is blocking the suction canal.
 Empty the dirt container.
 Remove choking of suction nozzle, suc-
tion tube, suction hose, or cartridge fil-
ter.
 Exchange the paper filter bag.
 Change cartridge filter.
 Check the proper installation of the car-
tridge filter.
 Change cartridge filter.
Turn off the appliance
After each operation
Storing the Appliance
Transport
Storage
Maintenance and care
Change cartridge filter
Troubleshooting
Suction turbine does not run
Vaccum turbine is running but the
machine is not sucking in dust/dirt
Suction capacity decreases
Dust comes out while vacuuming
9 EN