Karcher K 4 Premium - Manual (Page 18)

– 8
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out page!
1 Coupling element for water
connection
2 Storage for trigger gun
3 Water connection with integrated sieve
4 Appliance switch "0/OFF“/ „I/ON“
5 High pressure hose
6 Dosage regulator for detergent
7 Storage for trigger gun
8 High-pressure hose drum
9 Transport handle
10 Hand crank for hose drum
11 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
12 Storage for spray lance
13 Storage hook for mains connection ca-
ble
14 Mains cable with mains plug
15 Plug 'n' Clean detergent bottle with
locking lid
16 Bearing wheel
17 Trigger gun
18 Lock trigger gun
19 Key to detach the high pressure hose
from the trigger gun
20 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the hand spray gun
and turn the spray lance to the desired
position.
21 Spray lance with Dirtblaster
For strong contaminations
———————————————–
Optional accessories
22 Washing brush
Suitable for use with detergents.
23 Rotary washing brush
Suitable for use with detergents.
Especially suitable for cleaning cars.
24 Foam nozzle with detergent container
With powerful foam for effortless clean-
ing.
———————————————–
Not included in the delivery
25 Water supply hose
Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.
Illustrations on fold-out page!
Mount loose parts delivered with
appliance prior to start-up.
Illustration

Push the wheels into the intake.
 Secure the wheels using the included
plug. Align the plug properly!
Illustration

Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Insert the top holder and push down all
the way.
Illustration

Press in the storage hook and lock it
into the top position.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration

Slide the transport handle into the guide
and secure it with 2 screws.
Description of the Appliance
Before Startup
Attaching the Accessories
Install wheels
Install the storage for trigger gun
Install the storage hook for the mains
connection cable
Install the transport handle
18 EN