Karcher HKS 100 - Manual (Page 24)

- 10
For further special configurations please
contact Kärcher. The nozzle size is marked on the key sur-
face of the nozzle.
1 Counterweight
2 Protective cover
3 Frame

Screw the counterweight onto the inte-
rior cleaner.
 Screw cleaning head to the hose or the
frame (frames: see accessories).
Note: The interior cleaner was filled with
regulator fluid, adjusted and sealed ex fac-
tory. Do not turn the regulator screw, as
proper operation will no longer be guaran-
teed and a readjustment by the customer
service will be necessary.
A Regulator screw
Adjusting the height of the cover:

Release fastening toggle.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Adjusting the height of the cover:

Loosen the fastening toggle for height
adjustment.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Tilt the interior cleaner:

Loosen the fastening toggle for tilting.
 Set the inclination (±15°) of the interior
cleaner.
 Tighten the fastening toggle.
Selecting the nozzle
Flow volume [l/h] Pressure [MPa] Number of noz-
zles
Nozzle size [mm] Order No. Remark
3000 7,5 2 2,5 5.765-018.0
3000 5,0 2 2,7 4.765-006.0 Standard
3400 9,5 2 2,5 5.765-018.0
3800 8,0 2 2,7 4.765-006.0 Standard
4500 8,5 2 2,9 5.765-025.0
The following nozzles are available upon request:
Flow volume [l/h]
Pressure [MPa] Number of noz-
zles
Nozzle size [mm] Order No. Remark
2 1,65 5.765-082.0
4 1,65 5.765-082.0
4 1,8 4.765-007.0
2 2,4 5.765-007.0 Brass, for solvents only
2 3,5 5.768-075.0
2 3,8 4.765-008.0
Start up
Regulator screw
Cover with frame
Swivel frame
24 EN