Karcher HD 10-25-4 Cage Plus - Manual (Page 16)

16 English
Î Activate hand spray gun until device is
pressure-less.
Î Press the safety lever of the hand-spray
gun to secure the lever of the pistol
against being released accidentally.
ƽ Danger
Danger of scalding by means of hot water.
The water remaining in the switched off de-
vice can get heated up. When you remove
the hose from the water inlet, the heated
water can spray out and cause scalding.
Remove the hose only when the device has
cooled down.
Î Pull the device behind you at the handle
for transporting it over longer distances.
Î Insert the hand-spary gun in the holder.
Î Coil the high-pressure hose and hang it
over the hose storage.
Î Coil the connection cable around the
hose storage.
ṇ Warning
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
Î Drain water.
Î Pump in conventional frost protection
agents through the appliance.
Note
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
Î
Operate device for max. 1 minute until
the pump and conduits are empty.
ƽ Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note
Please dispose off used oil only in the col-
lection points provided for them. Please
hand over old oil, if any, only at such plac-
es. Polluting the environment with used oil
is a punishable offence.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Î Check connection cable for damages
(risk of electrical shock); get the dam-
aged connection cable replaced imme-
diately by an authorised customer
service person/ electrician.
Î Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure
hose.
Î Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
Î Check oil level Please contact Custom-
er Service immediately if the oil is milky
(water in oil).
Î Clean the fine filter.
Unpressurize the appliance.
Unscrew lid with filter.
Clean the filter with clean water or com-
pressed air.
Reinstall in reverse sequence.
Î Clean filter at the detergent suck hose.
Transport
Storing the Appliance
Frost protection
If you cannot store it in a frost-free
place:
Maintenance and care
Safety inspection/ maintenance
contract
Before each use
Weekly