Karcher NT 14-1 Ap Te Adv L - Manual (Page 18)

– 4
– After the wet vacuuming: Clean the flat
folded filter with the filter cleaning.
Clean the electrodes with a brush.
Clean the container with a damp rag
and dry it.
Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
Illustration

Fold the push handle upward. The push
handle will lock into place.
 Press the latches on the side of the
push handle. Fold the push handle
down.
 Plug in the main plug.
 Switch on the appliance at the main
switch.
Only for appliances with built-in socket:
ƽ
Danger
Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.

Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Switch on the appliance at the main
switch.
Indicator lamp is on; vacuum cleaner is in
the standby mode.
Note: The vacuum cleaner is turned on and
off automatically with the electric power
tool.
Note: The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.
Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration

Adjust the stepped power tool adaptor
to fit the connection of the electric pow-
er tool.
Illustration

Remove the elbow from the handle.
 Insert the connection socket on the
handle.
Illustration

Connect the adaptor to the electric pow-
er tool.
Note: A filter dedusting every 5 to 10 min-
utes will increase the life of the flat folded
filter.
Illustration

Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times. The flat
folded filter is automatically cleaned
through an air jet (pulsating sound).
Illustration

Press the chassis latches and remove
the vacuum unit.
Illustration

Clean areas that are difficult to access
or steps.
 Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times.
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Clip connection
Operation
Fold the push handle in/out
Turning on the Appliance
Working with electrical power tools
Semi-automatic filter dedusting
Cleaning areas that are difficult to
access
Turn off the appliance
After each operation
18 EN