Karcher IVC 60-12-1 Ec H Z22 - Manual (Page 23)

– 5
ṇ
Warning
Health risk on account of fine dust! If the
suction hose is removed, the suction con-
nection must be closed.
Illustration

Properly insert the connection socket in
the suction connection.
 Push in the connection socket until it
locks into place.
Note: The dirt container must be emptied if
it is filled up to the lower edge of the suction
nozzle on the waste container.
– Check the fill level of the dirt container
at regular intervals, as the appliance
does not shut off automatically.
Caution
– Two suction hoses may not be connect-
ed to the vacuum cleaner at the same
time. One suction nozzle must be tightly
sealed with the connection bushing.
– When using the disposal bag, the lower
suction nozzle must be tightly sealed.
– When using the safety filter bag, the up-
per suction nozzle must be tightly
sealed.
– If the suction hose is connected to the
wrong suction nozzle, a malfunction of
the appliance occurs (automatic moni-
toring of the suction performance does
not respond, increased dust emission,
disposal bag is sucked towards the
top).
Caution: Depending on the application,
the suction hose can be attached to 2
different suction nozzles:
1 Suction nozzle on the intermediate ring:
Dry vacuum cleaning with disposal bag:
Coarse dusts, large quantities of vacu-
umed material over a short period of
time
The appliance is fitted with a disposal
bag, order no. 6.907-347.0 (5 ea.).
2 Suction nozzle on the dirt container:
Dry vacuum cleaning with safety filter
bag: Asbestos, fine particles, constantly
large quantities of vacuumed material
The appliance is equipped with a safety
filter bag with a sealing cap, order no.
6.904-420.0 (5 pcs).
Note: You can use this appliance to take up
all types of dust up to dust class H. The use
of a dust collection bag is required by law.
Note: As an industrial vacuum cleaner the
appliance is suitable for vacuuming up dry,
combustible dusts with MAK values.
Caution
Please note the following when switch-
ing from wet to dry vacuum cleaning:
If you vacuum dry dust while the filter ele-
ment is still wet the filter will become ob-
structed and may be damaged beyond
repair.

Dry the wet filter properly before use or
replace it with a dry one.
 Change the filter, if required, according
to instructions under the section "Main-
tenance and Care".
 Lock parking brakes.
Illustration

Remove the pressure balancing at the
upper end.
 Pull the locks of the placement mechan-
ics up.
 Pull the push handle upward. The con-
tainer is unlocked and lowered.
Illustration

Pull the container out by the handle.
Close the suction connection
Dirt receptacle
Dry vacuum cleaning
Installing disposal bag/safety filter bag
Illustration

Insert the disposal bag so that it is snug
against the reservoir wall and the res-
ervoir bottom.
 Pull disposal bag over the container.
Illustration

Insert the safety filter sack.
Illustration

Pull the safety filter sack over the con-
tainer.
23 EN