Troubleshooting, Technical specifications – Karcher G 4-10 M User Manual
Page 12
– 5
Illustration
Remove the oil filling screw with oil dip-
stick and wipe dipstick clean.
Insert the oil filling screw with oil dip-
stick all the way into the oil fill opening
and remove. Read the value of the oil
level.
Fill in engine oil (SAE 10W 30) to the
maximum mark.
(Maximum fill capacity = 0.3 l).
Screw in oil filling screw.
Illustration
Remove the oil filling screw with oil dip-
stick and wipe dipstick clean.
Unscrew the oil drain screw and collect
oil.
Fix in the oil drain screw and tighten it.
Fill in engine oil (SAE 10W 30) to the
maximum mark.
(Maximum fill capacity = 0.3 l).
Screw in oil filling screw.
Subject to technical modifications!
Check oil level
Oil change
Troubleshooting
Faults
Cause
Remedy
There will be no igniting.
Motor switch has been
switched off.
Switch on engine switch.
Spark plug is defective or
dirty.
Clean or replace the spark
plug.
Compression too low or
does not exist.
Spark plug is not properly
tightened.
Tighten the spark plug.
No fuel infeed.
Fuel cock is closed.
Open fuel cock
No petrol in the tank.
Refill petrol.
Technical specifications
Grow 154F
Cylinder diameter
54
mm
Piston stroke
38
mm
Cylinder capacity
87
cm
3
Fuel type
unleaded vehicle petrol (90 ROZ)
Engine oil - type
SAE 10 W30
max. filling volume of engine oil
0,3
l
Spark plug
NGK / Bp6HS
Champion / L66Y
12
EN