beautypg.com

Storage, Maintenance and care, Clean main filter basket – Karcher T 9-1 Bp User Manual

Page 13: Replace motor protection filter, Troubleshooting, The appliance shuts off during the operation, Suction capacity decreases, Dust comes out while vacuuming, Appliance is not running, In battery mode

background image

– 4

CAUTION

Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

ƽ DANGER

Turn the appliance off and disconnect the
mains plug or remove the batteries before
carrying out any tasks on the machine.

Main filter basket (washable), clean it
under running water if necessary.

ATTENTION
Risk of damage! Never insert the main filter
basket while wet.

Release and remove the suction head.

Push the grids of the motor protection
filter down, turn and remove.

Remove the motor protection filter.

Insert the new motor protection filter.

Insert the grid of the motor protection fil-
ter and lock it into place.

Insert and lock the suction head.

ƽ DANGER

Turn the appliance off and disconnect the
mains plug or remove the batteries before
carrying out any tasks on the machine.

– Motor thermal protector has responded.

Replace the fleece filter bag or paper fil-
ter bag (option).

Replace motor protection filter.

Check all parts for plugging.

Switching back on after the motor turbine
has cooled off, after approx. 30 to 40 min-
utes.

Remove choking of suction nozzle, suc-
tion tube or suction hose.

Replace the fleece filter bag or paper fil-
ter bag (option).

Clean the main filter basket under run-
ning water.

Insert/lock the suction head correctly.

Replace defective suction hose.

Replace motor protection filter.

Replace the fleece filter bag or paper fil-
ter bag (option).

Check the fleece filter bag or paper filter
bag (option).

Insert/lock the suction head correctly.

Insert undamaged main filter basket.

Reinsert motor protection filter correct-
ly.

– Battery empty

Charge the battery.

– No battery is inserted

Insert the battery.

Turn on the appliance.

– PCB overheated

Mains operations are possible.

Note: The appliance can be operated in
battery mode after the PCB has cooled
down.
– Batteries empty

Charge the batteries.

– No battery is inserted

Insert the battery.

Check the receptacle and the fuse of
the power supply.

Check the power cable and the power
plug of the device.

Storage

Maintenance and care

Clean main filter basket

Replace motor protection filter

Troubleshooting

The appliance shuts off during the

operation

Suction capacity decreases

Dust comes out while vacuuming

Indicator lamp for battery on the

appliance is blinking

Appliance is not running

In battery mode

In mains operation

13

EN

This manual is related to the following products: