Karcher IVL 50-24-2 - Manual (Page 15)

– 6
You can thus solve any problems that may
occur.
The indicator lamp glows when the container
is full. If the indicator lamp glows when the
container is empty, there is a fault which has
to be fixed by the Kärcher customer service.
Motor (suction turbine) does not start
Liquid container filled.

Empty the liquid container.
 Empty the filter basket.
No electrical voltage.

Check cables, plugs and socket.
Fill level probe is dirty.

Carefully clean the fill level probe.
1 Indicator lamp proximity switch
Proximity switch distorted.

Check the position of the proximity
switch (indicator lamp of a proximity
switch must be illuminated).
Suction capacity decreases slowly
Nozzle, suction hose or suction pipe may
be blocked.

Check, clean accessories.
Filter is dirty.

Clean filter.
Emptying the liquid container is taking
very long
Drain hose crushed or obstructed.

Check the drain hose and the valve and
clean them.
ṇ
Warning
All checking and work on electrical parts
must be performed by an authorized elec-
trician. In the event of continuing faults,
contact Kärcher customer service.
Accessories are not included in the deliv-
ery. The accessories for the device must be
ordered separately, depending on the ap-
plication.
Recommended accessories for machine
cleaning:
Recommended accessories for floor clean-
ing:
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Troubleshooting Accessories and Spare Parts
Accessories Order number
Suction hose, PU
5m, DN 51 6.906-786.0
Suction nozzle, rub-
ber, DN51 6.902-146.0
Suction nozzle, plas-
tic, DN51 6.906-773.0
Suction nozzle,
cone-shaped, DN51 6.906-764.0
Accessories Order number
Suction hose, PU
5m, DN 51 6.906-786.0
Elbow, stainless
steel, DN51 6.906-767.0
Suction pipe, stain-
less steel DN51 (is
needed twice) 6.906-766.0
Floor nozzle 370mm
DN51 4.130-408.0
15 EN