Haltech Platinum PRO PLUG-IN HONDA DC5 2005 - 2006 (HT055048) - Manual (Page 3)

Notes PLATINUM Pro Plug-in Honda DC5
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System.
This fully programmable Plug and Play product opens the door to virtually limitless
performance modification and tuning of your vehicle. Programmable systems allow you
to extract all the performance from your engine by delivering precisely the required
amount of fuel and ignition timing that your engine requires for maximum output under
all operating conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into
a vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual can also be downloaded from the
Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Honda DC5 ECU supports the following vehicles:
Honda Integra DC5 Type S (2005/2006 Japanese Delivered Model)
Honda Integra DC5 Type S (2005/2006 Australian Delivered Model)
Acura RSX (2005/2006 USA Delivered Model)
Platinum Pro Plug-in Honda DC5 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• USB Cable
• Software CD
• Quick Start Guide
• Haltech Sticker
Optional Accessories ( Sold Separately )
• Rear Auxiliary Harness ( HT040003 )
• Platinum Series Mounting Kit (HT039000)
Loaded Basemap
Your Platinum Pro Plugin has been programmed with a basemap to suit a
Honda Integra Type S with a K20A standard engine using the factory
Honda MAP Sensor.
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle.