Haltech Platinum PRO PLUG-IN Nissan Z32 300ZX (HT055007) - Manual (Page 3)

Notes
PLATINUM Pro Plug-in Nissan Z32 / 300ZX
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System. This fully
programmable Plug and Play product opens the door to virtually limitless performance
modification and tuning of your vehicle. Programmable systems allow you to extract all
the performance from your engine by delivering precisely the required amount of fuel
and ignition timing that your engine requires for maximum output under all operating
conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into a
vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual is included in the software which can be
downloaded from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Nissan Z32 / 300ZX ECU supports the following:
• Nissan Z32 / 300ZX
Platinum Pro Plug-in Nissan Z32 / 300ZX Kit Includes
• Haltech Platinum Pro Plug-in ECU
• USB Cable
• Software CD
• Quick Start Guide
• Haltech Sticker
Loaded Basemap
Your Platinum Pro Plug-in has been programmed with a basemap to suit a
Nissan Z32 / 300ZX running a VG30DETT engine using a standard MAF sensor.
Alternatively, a basemap using the Haltech ECU Internal MAP Sensor as a load
reference is available in the following folder for you to upload into your ECU:
C:\Users\\Documents\Haltech\ECUMaps\Nissan\Z32
If you choose this basemap, then please make sure you connect the Haltech ECU
Internal MAP sensor to the intake manifold prior to starting the vehicle.
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle.