Haltech Platinum Sport GM (HT051100) - Manual (Page 12)

The Haltech CAN Network
The Haltech CAN network allows for simple and effective expansion in ECU capability
and functionality without having to go to the trouble of wiring in a whole new computer.
Expansion is made possible by the addition of multiple expansion devices that
communicate to the main ECU via a Control Area Network (CAN).
Installation time and costs are kept to a minimum as all expansion devices are
powered up from the main ECU via the pre-terminated connection cable that comes
with each expansion device.
Simply connect the device directly to the 8 pin CAN connector on the rear of the ECU
or connect using an optional Haltech CAN Hub (order as part # HT059991) if multiple
expansion devices are required).
Each expansion device is pre-programmed with a unique ID code which allows it to
be recognised on the network and work correctly first time every time.
For current available expansion devices please go to our website at
www.haltech.com
Figure 7 – Haltech ECU connected to a Racepak Dash
Figure 8 – Haltech ECU connected to 5 Auxiliary CAN based devices
3. Disconnect the OEM ECU from the wiring harness
Remove the 2 Phillips screws securing it to the vehicle
Remove OEM ECU from vehicle.
Figure 2 – OEM ECU Removal
4. Connect the Haltech Sport GM to the vehicles wiring harness
Connect the USB cable and optional Auxiliary harness (#HT040003 if required)
Mount the ECU to the vehicle using 3M Velcro tape and cable ties
Figure 3 – Haltech Sport GM Mounted in vehicle