A.J. Antunes & Co MT-12 9200148 - Manual (Page 6)

6 P/N 1010918 Rev. E 03/13
Partial
Load
READY
Turn
Power Switch ON
(Back of Unit)
The unit beeps twice and both
lights blink twice.
Allow the unit to warm up for
30 minutes.
A
B
1
FULL LOAD = 7 - 12
muffin halves
PARTIAL LOAD = 1 - 6
muffin halves
2
Partial
Load
READY
Press the
Partial Load button
ONLY when toasting
a partial load
of product.
3
Partial
Load
READY
Push the Front Door
Control Knob IN
to UNLOCK
and open the
Front Door.
Next, slide the
loaded Spatula
into the unit.
A
B
4
5
NOTE: When the Amber light is on, a Partial
Load Cycle is selected. When this light is
off, a Full Load Cycle is selected.
NOTE: Always use a Spatula to insert and
remove product from the unit. This is the
only approved method for loading and
unloading product into the toaster.
Partial
Load
READY
Pull the Front Door
Control Knob OUT
to close and LOCK
the Front Door.
Next, pull out the
Spatula. The locked
door keeps the
product inside the
toaster.
A
B
Partial
Load
READY
TOASTING TIMES:
Full Load = 90 - 130 seconds
Partial Load = 85 - 125 seconds
6
NOTE: The indicator lights blinks and
the Audio Signal beeps when the toast
cycle completes.
Partial
Load
READY
Carefully insert the
Spatula into the unit.
This transfers the
the product onto
the spatula.
7
The Crumb Tray and Removable Plate will
be very hot when the unit is in opera-
tion. Do NOT use the Crumb Tray and
Removable Plate as a means to load/
unload product from the unit.
Do NOT toast product with the Spatula
inserted in the toaster.
NOTE: If the self-test fails, a series of beeps
will sound (see the Diagnostic Flow Chart).
Partial
Load
READY
Remove the
Spatula out of
the unit carefully. B
Push the Front Door
Control Knob IN
to UNLOCK
and open the
Front Door.
A
8
9
Remove product from the spatula. The
unit is ready for another cycle.
OPERATION