ATEN ATEN Petite CS-64U - Manual (Page 13)

Alternate Port Switching Keys
The port switching activation keys can be changed from tapping
the Scroll Lock key twice ([Scroll Lock] [Scroll Lock]) to tapping
the Ctrl key twice. To change the port switching activation keys,
do the following:
1. Invoke HSM (see p. 10)
2. Press and release the T key
Note: This procedure is a toggle between the two methods. To
revert back to the original [Scroll Lock] [Scroll Lock]
method, invoke HSM, then press and release the T key
again.
Keyboard Operating Platform
The CS-64U’s default port configuration is for a PC Compatible
keyboard operating platform. If your requirements call for different
port settings (you have a Mac or Sun attached to a port, e.g.), you
can change a port’s keyboard operating platform configuration as
follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see p. 10)
3. Press and release the appropriate Function key (see table).
After completing a setting, you automatically exit HSM.
Function Key Operation
[F10] Auto detects the keyboard operating platform (for
PC compatible systems).
[F2] Sets the Mac keyboard operating platform.
[F3] Sets the Sun keyboard operating platform.*
* The first time that the Sun system runs from a port, you must
configure its port for the Sun keyboard operating platform before
you turn the system on, or else the Sun system will not start.
- 11 -
2004-06-10