Alliance Laundry Systems UW35M2 - Manual (Page 17)

Operation
15 F232088 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Cycle Selection
The push button cycle selector switch on the control
module provides a selection of four complete
automatic cycles. See the table below for more
information.
Press the START button to start the selected cycle.
Mechanical Timer Cycles
Step
Time
(Min)*
Water Level
Program Water Temperature
White
Permanent
Press
Colors Bright Colors
Prewash 2
High Warm Warm Cold Cold**
Drain 1
Auxiliary Heat Wash Step Temperature † 194 °F / 90 °C 140 °F / 60 °C 104 °F / 40 °C 86 °F / 30 °C
Wash 4
Low Hot Warm Warm Cold Drain 1
Extract 0.5
Rinse 1 1.5
High Cold Cold Cold Cold Drain 1
Extract 0.5
Rinse 2 1.5
High Cold Cold Cold Cold Drain 1
Extract 0.5
Rinse 3 1.5
High Cold Cold Cold Cold
Drain 1
Extract 4
Shakeout 0.5
*Cycle times are for the factory-preset jumper configuration and do not include fill and heat times. See the Programming
section for more information.
**Auxiliary heat-equipped models only. Standard models do not have a prewash step in the Bright Colors cycle.
†Auxiliary heat-equipped models only.