AEG OKO-SANTO 2642-6 KG - Manual (Page 10)

29
PR228
14. Insert the bottom hinge into the
bottom of the freezer compart-
ment door.
15. Fully screw down the bottom
hinge.
16. Re-assemble the ventilation-
grill (D)
17. Unscrew the handles. Refit
them on the opposite side after
having piercing the plugs with
a punch. Cover the holes left
open with the plugs contained
in the documentation pack.
Prior to Initial StartÐUp
¥ Please clean the appliance interior and all accessories prior to ini-
tial start-up (see section: ÒCleaning and CareÓ).
Electrical Connection
Any electrical work required to install this appliance should be car-
ried
out by a qualified electrician or competent person.
WARNING Ð THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should these safety
measures not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate. The rating pla-
te is inside, on the left.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
Important!
The wires in the mains lead are coloured in accordance with the fol-
lowing code:
Green and Yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings indentifying the terminals