beautypg.com

Start-up and use – Indesit PI631 [multilanguage] User Manual

Page 19

background image

GB

19

! The position of the corresponding gas burner or

electric hotplate* is shown on every knob.

Gas burners

Each burner can be adjusted to one of the following

settings using the corresponding control knob:

•

Off

Maximum
Minimum

To light one of the burners, hold a lit match or lighter

near the burner and, at the same time, press down

and turn the corresponding knob anti-clockwise to the

maximum setting.

Since the burner is fitted with a safety device, the

knob should be pressed for approximately 6 seconds

to allow the automatic device keeping the flame alight

to heat up.

When using models with an ignition button, light the

desired burner by first pressing the gas burners
button (identifiable by the

symbol), then pressing

down the corresponding knob as far as possible and

turning it anticlockwise towards the maximum setting.

! If a flame is accidentally extinguished, turn off the

control knob and wait for at least 1 minute before

trying to relight it.

To switch off the burner, turn the knob in a clockwise

direction until it stops (when reaches the “•” position).

Electric hotplates*

The corresponding knob may be turned clockwise or

anti-clockwise and set to six different positions:

Setting Normal or Fast Plate

0

Off

1

Low

2 - 5

Medium

6

High

When the selector knob is in any position other than

the off position, the ‘on’ light comes on.

Practical advice on using the burners

To ensure the burners operate efficiently:

• Use appropriate cookware for each burner (see

table) so that the flames do not extend beyond the

bottom of the cookware.

• Always use cookware with a flat base and a cover.

• When the contents of the pan reach boiling point,

turn the knob to minimum.

Burner

ø Cookware Diameter (cm)

Fast (R)

24 - 26

Semi Fast (S)

16 - 20

Auxiliary (A)

10 - 14

Triple Crown (TC)

24 - 26

Practical advice on using the electric

hotplates

To avoid heat loss and damage to the hotplates, use

pans with a flat base, whose diameter is no less than

that of the hotplate itself.

Setting

Normal or Fast Plate

0

Off

1

Cooking vegetables, fish

2

Cooking potatoes (using steam) soups,
chickpeas, beans.

3

Continuing the cooking of large quantities
of food, minestrone

4

For roasting (average)

5

For roasting (above average)

6

For browning and reaching a boil in a

short time.

! Before using the hotplates for the first time, you

should heat them at maximum temperature for

approximately 4 minutes, without placing any pans on

them. During this initial stage, their protective coating

hardens and reaches its maximum resistance.

Start-up and use

*

Only available on certain models.