Asus P4P800-X - Manual (Page 52)

2-16 Chapter 2: BIOS information
When you set the AI Overclocking Tuner item to [Manual], the related
overclocking items appear.
CPU Frequency (MHz) [XXX] (value is auto-detected)
Indicates the frequency sent by the clock generator to the system bus and PCI
bus. The bus frequency (external frequency) multiplied by the bus multiple equals
the CPU speed. The default value of this item is auto-detected by the BIOS. The
values range from 100 to 400. Use the plus (+) or minus(-) keys to adjust the CPU
frequency. Refer to the following table for the correct Front Side Bus and CPU
External Frequency settings.
Front Side Bus CPU External Frequency
FSB 800 200 MHz
FSB 533 133 MHz
FSB 400 100 MHz
Table 2.4.1 FSB/CPU External Frequency Synchronization
Refer to the CPU documentation before setting the CPU VCore voltage. A very
high Vcore voltage may severely damage the CPU!
CPU VCore Voltage [Auto]
Allows you to select a specific CPU VCore voltage. The configurations depends on
the type of CPU installed.
Configure System Frequency/Voltage
AI Overclock Tuner [Manual]
CPU Frequency [133]
DRAM Frequency [Auto]
AGP/PCI Frequency [Auto]
CPU VCore Voltage [Auto]
DDR Reference Voltage [Auto]
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency depending on the CPU installed.
Configuration options: FSB 400 CPU: [266 MHz] [Auto], FSB 533 CPU: [333 MHz]
[266 MHz] [Auto], FSB 800 CPU: [400 MHz] [320 MHz] [266 MHz] [Auto]
AGP/PCI Frequency (MHz) [Auto]
Allows you to adjust to a higher AGP/PCI frequency for better system performance
and overclocking capability. Configuration options: [Auto] [66.66/33.33]
[75.00/37.50] [80.00/40.00]
Selecting a very high AGP/PCI frequency may cause the system to become
unstable! If this happens, revert to the default setting.