American Dryer Corp. ML-122D - Manual (Page 10)

6
Gas
Steam
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS (GAS AND STEAM)
NOTE: Contact manufacturer for electric model specifications.
IMPORTANT: Dryers must be provided with a clean, dry, regulated 80 PSI +/- 10 PSI (5.51 bars
+/- 0.69 bars) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
MAXIMUM CAPACITY (DRY WEIGHT) 120 lbs 54.43 kg
BASKET (TUMBLER) DIAMETER 44-1/2” 113 cm
BASKET (TUMBLER) DEPTH 42-1/2” 108 cm
BASKET (TUMBLER) MOTOR 1 HP 0.746 kw
BLOWER MOTOR 3 HP 2.238 kw
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
BASKET (TUMBLER) VOLUME 38.2 cu. ft. 1.08 cu. m.
DRYERS PER 20’/40’ CONTAINER 3/7
DRYERS PER 45’/48’ TRUCK 9/9
VOLTAGE AVAILABLE 208-460v 3ø 3, 4w 50/60 Hz
HEAT INPUT 415,000 btu/hr 104,580 kcal/hr
APPROX. WEIGHT (UNCRATED) 1,500 lbs 680.4 kg
APPROX. WEIGHT (CRATED) 1,725 lbs 782.5 kg
AIRFLOW 2,800 cfm 79.29 cmm
INLET PIPE SIZE 1” 2.54 cm
COMPRESSED AIR @ 80 PSI (5.51 BARS) 2.5 cfh 0.07 cmh
VOLTAGE AVAILABLE 208-460v 3ø 3, 4w 50/60 Hz
APPROX. WEIGHT (UNCRATED) 1,650 lbs 748.4 kg
APPROX. WEIGHT (CRATED) 1,875 lbs 850.5 kg
HEAT INPUT 13 Bhp
STEAM CONSUMPTION 450 lbs/hr 200.2 kg/hr
AIRFLOW 2,800 cfm 79.29 cmm
INLET PIPE SIZE 1-1/4”
COMPRESSED AIR @ 80 PSI (5.51 BARS) 3.25 cfh 0.09 cmh
Shaded areas are stated in metric equivalents