Avocent PS/2 IP User Manual
Page 58
8/16/32 PS/2 KVM over IP switch
58
You may send this information along together with a support request. It will help us
troubleshooting your problem.
Reset Functions
This section allows you to reset specific parts of the device. Currently this involves the video
engine and the PS/2 IP-KVM switch itself. Resetting the card itself is mainly needed to
activate a newly updated firmware. It will close all current connections to the administration
console and to the Remote Console. The whole process will take about half a minute.
Resetting sub devices (e.g. video engine) will take some seconds only and do not result in
closing connections.
6.5.2 Event
Log
Figure 6-32. Event Log List
Figure 6-32 displays the log list including the events that are logged by the PS/2 IP-KVM
switch.