AB Soft Litebook Elite 2.02 - Manual (Page 3)

Learn more at www.litebook.com
3
EASY SET-UP GUIDE:
1) ATTACH COVER/STAND: (If not attached upon receipt)
• Remove cover/stand from nylon carrying case
• Align base of cover/stand to shaft at base of your Elite. Push ‘gently’ until you hear
a ‘CLICK’. The stand is now attached.
2) Pull out the cover/stand from the front of the Litebook Elite as shown.
3) BEFORE FIRST USE : CHARGE BUILT-IN BATTERY:
With Elite in upright usage position, plug the AC adapter into the Litebook and into an
electrical outlet. Allow 4+ hours to fully charge built-in battery the first time. Unit is fully
charged when all 4 Green battery charge indicator LED’s are lit.
4) Turn on the Litebook Elite by pressing the on/off button. (See Fig. 1 on Pg. 2)
5) Begin Usage. (See Fig. 3 on Pg. 5)
To learn more
about the Elite
adapter and
international
plug set
see page 8.
NOTE: Plugging the unit in for the first time will automatically program the unit for a 30
minute session, which is suitable for most users and most applications. Should you
wish to change the timer setting, follow the easy steps in #6 on page 4. The timer does
NOT need to be programmed before each use.