Acer AT3705-MGW - Manual (Page 23)

English
23
• Press the PIP/PBP/POP button once to display activate picture-in-
picture (PIP).
• Press the PIP/PBP/POP button twice to activate picture-by-picture
(PBP).
• Press the PIP/PBP/POP button three times to activate picture-on-
picture (POP). Then, the POP screens will display the TV channel
programs one by one.
PIP
1a. Press the ACTIVE key to toggle between PIP screens.
1 2 3
4 5 6
7 8
0
9
1b. Press the TV, AV, SCART or PC keys, number keys or CH up or
down to change the content of the active screen.
2. Press the SWAP key to change the content between the
primary and the subscreen.
PIP PIP Swap
3. Press the POSITION key to select the location of the
subscreens, from lower right -> lower left -> upper left ->
upper right, as shown in the image.
PIP PIP
PIP PIP
4. Press the SIZE/MODE key to select the size of the subscreen,
from 20% -> 30%, as shown in the image.
PIP
PIP/PBP/POP
Advanced features
PBP (Picture-by-Picture) PIP (Picture-in-Picture)
PIP
PBP
POP (Picture-on-Picture)
POP POP POP
POP
POP
1. For a list of the available sources for this feature, please refer to the appendix at the end of this manual.
2. The OSD menu is not available in PIP/POP/PBP modes.
4.in.1.05.series.0303.indb 23 3/8/2006 2:03:49 PM