Acer AT3705-MGW - Manual (Page 15)

English
15
2
Setup Wizard
Step 5. Scan for digital channels.
If you do not have digital service, press OK to skip this
stage. The onscreen menu will ask you for confirmation.
Step 6. Scan for analog channels.
Step 7. Setup is now complete. You are ready to begin watching TV.
If you leave the setup process before it is complete, you will be given a choice of options:
1. Resume setup
2. Resume setup at next startup
3. Exit and don't remind me
Select an option and press OK to exit.
3
Changing channels
a. Press 0-9 on the remote control to select a channel. The
channel changes after 2 seconds. Press ENTER to select the
channel immediately.
b. Pressing the channel (CH) up/down button on the remote
control will also change the channel.
4
Adjusting the volume
Adjust the volume level using the volume (VOL) +/- button on
the remote control.
Setup may vary due to local broadcast differences.
4.in.1.05.series.0303.indb 15 3/8/2006 2:03:45 PM