Nilfisk-ALTO AMX-120 - Manual (Page 18)

17
8. TECHNICAL SPECIFICATION
Mono input channels
Stereo input channels
Impedances
Equalization
Microphone input electronically balanced, discrete input configuration
Frequency response 10Hz to 55kHz, + 3dB
Distortion (THD & N) 0.005% at 4dBu, 1kHz +
Gain range 0dB to 44dB (MIC)
SNR (Signal to Noise Ratio) 115dB
Line input electronically balanced
Frequency response 10Hz to 55kHz, 3dB +
Distortion (THD & N) 0.005% at 4dBu, 1kHz +
Sensitivity range +15dBu to 30dBu
Line input Balanced
Frequency response 10Hz to 55kHz, 3dB +
Distortion (THD & N) 0.005% at +4dBu, 1kHz
Microphone input 1.4kOhm
All other inputs 10kOhm or greater
Tape out 1kOhm
All other output 120Ohm
Hi shelving + 15dB @12kHz
Mid bell + 12dB @2.5kHz
Low shelving + 15dB @80Hz
Low Cut filter 75Hz, 18dB/oct.
Main Mix Section
Noise (Bus noise) Fader 0 dB, channels muted: 100dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned and set to
UNITY gain: 90dBr (ref.:+4dBu)
Max output 22dBu unbalanced, 1/4" jacks +
AUX Sends max out +22dBu
Power supply (AC/AC Adaptor)
Main voltage USA/Canada 100 120V~, 60Hz
Europe 210 240V~, 50Hz
U.K./Australia 240V~, 50Hz
Power Consumption 11 watts
Physical
Net weight 1.65Kg (3.65lb)
Shipping weight 2.3Kg (5.11lb)
Dimension (W D H) 208mm 275.5mm 35/43mm
(6.06" 7.81" 1.01"/1.30")