Troubleshooting – Blodgett KLT-E Series User Manual
Page 18
16
OM-KLT-E
Troubleshooting
SYMPTOM
WHO
WHAT TO CHECK
Safety valve leaks a small
amount of steam when
the kettle is operating.
User
a. For contamination that prevents seating of valve. With full
pressure
in the jacket, pull the lever all the way briefly to blow the valve
clean, then let the lever snap back to seat the valve.
Authorized
Service Rep Only
a. Safety valve for defects. Replace any defective valve with an
identical valve. X
Kettle is hard to tilt.
User
a. For air in the jacket. See “Jacket Vacuum” in the “Maintenance”
section of this manual.
Authorized
Service Rep Only
a. Tilting gear and worm for contamination and for proper alignment
and lubrication. X