Nilfisk-ALTO 30 H - Manual (Page 16)

14
ATTIX 30/50 H/M
english
*) Optional accessories / Option depending on model
4.2.3 Suction power control *)
Switch
position
Function
The suction
power control
switch allows
precise
adaptation of
the suction
power for
different
cleaning tasks.
4.2.4 Auto-On/Off-Operation -
"auto" switch position *)
The vacuum cleaner is switched
on and off by the power tool con-
nected. Dirt is picked up from the
source of dust immediately.
To comply with regulations, only
approved dust producing tools
should be connected.
The maximum power consumption
of the connected electrical appli-
ance is stated in section "Technical
data".
Before switching the switch to po-
sition „auto“, ensure that the tool
connected to the appliance socket
is switched off.
1. Switch off the vacuum clean-
er.
2. Switch off the power tool.
3. Connect the power tool and
the vacuum cleaner with a
suction hose.
4. Insert the plug of the pow-
er tool into the tool socket
on the operating panel
of the vacuum cleaner.
5. Switch on the vacuum clean-
er. Switch in "auto" position.
6. Switch on the power tool. The
vacuum cleaner motor starts
when the connected power
tool is switched on.
When the power tool is
switched off, the vacuum
cleaner continues to run for
a short moment so that any
dust in the suction hose is
conveyed to the filter bag.
auto
auto