Technical specifications – Ampeg SVT-5 PRO User Manual
Page 12
Ampeg reserves the right to change specifications without notice.
Made with Pride in the U.S.A. by Ampeg • ©2001 AMPEG, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N 47-618-51 • 08/01
Technical Specifications
OUTPUT POWER RATING
1350 Watts Mono-Bridged @ 4 Ohms (1000 Watts Continuous)
840 Watts Mono-Bridged @ 8 Ohms (680 Watts Continuous)
2 x 675 Watts @ 2 Ohms (500 Watts Continuous)
2 x 420 Watts @ 4 Ohms (340 Watts Continuous)
2 x 255 Watts @ 8 Ohms (205 Watts Continuous)
TONE CONTROL RANGE
Clean Channel
Bass:
20dB range @ 40Hz
Midrange:
21dB range @ 300Hz
Treble:
18dB range @ 10kHz
Ultra Low:
+5dB @ 30Hz
Ultra High:
+7dB @ 15kHz
Overdrive Channel
Bass:
±12dB @ 100Hz
Midrange:
+20dB, -5dB @ 300 – 1.5kHz
Treble:
±12dB @ 7kHz
SIGNAL TO NOISE RATIO
75dB typical
COMPRESSION RATIO
4:1 (1dB change in output for 4dB change in input)
FOOTSWITCH JACKS
Ch/Combine:
Tip = channel select, Ring = combine
Octave/Mute:
Tip = Octave, Ring = Mute
POWER REQUIREMENTS
Domestic:
120VAC, 60Hz, 800VA
Export:
100/115VAC 50/60Hz, 800VA
230VAC, 50/60Hz, 800VA
SIZE AND WEIGHT
19/17.4”W x 5.6”H (with feet) x 15.5”D; 40 lbs
SVT-5 PRO Bass Amplifier
www.ampeg.com
Ampeg – The Power of Bass