Acura 2009 TSX - Manual (Page 301)

The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compass seems to be continually
showing the wrong direction and is
not self-calibrating, or the compass
display is blinking with the CAL
indicator on, do the following.
Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance. It can also be affected
by accessories such as antennas and
roof racks that are mounted by
magnets.
When you turn the ignition switch to
the ON (II) position, the compass is
self-calibrating, then the compass
display is shown in the display.
Turn the ignition switch to the ON
(II) position.
Do this procedure in an open
area, away from buildings, power
lines, and other vehicles.
Press and hold the MENU button
for about 5 seconds. The display
shows you the compass setting
menu items.
1.
2.
CONTINUED
On models without navigation system Compass Calibration
Compass Operation
Compass
Fe
a
tu
re
s
295
NOTE:
COMPASS COMPASS SETTING MENU ITEMS