Asus Pedestal/5U Rackmount Server TS500-E5 - Manual (Page 61)

ASUS TS500-E5 4-7
6. IDE setting (3-pin IDE_SW1)
This jumper allows you to enable or disable the onboard IDE connector. Set
to pins 1–2 to activate the IDE connector.
®
DS
AN
-D X/ TS
50 0- E5
DSAN-DX/TS500-E5
IDE setting
2 1 2 3
Enable IDE
(Default)
Disable
IDE_SW1
7. Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it
becomes corrupted.
To update the BIOS:
1. Prepare a floppy disk that contains the original or latest BIOS for the
motherboard (XXXXXX.ROM) and the AFUDOS.EXE utility.
2. Set the jumper to pins 2–3.
3. Insert the floppy disk then turn on the system to update the BIOS.
4. Shut down the system.
5. Set the jumper back to pins 1–2.
6. Turn on the system.
®
DS
AN
-D X/ TS
50 0- E5
DSAN-DX/TS500-E5
BIOS recovery setting
2 1 2 3
Normal
(Default)
BIOS
Recovery
RECOVERY1
Use the AFUDOS uitility version 3.12 to flash the BIOS.