Allied Telesis SWITCH AND SWITCHBLADE XEM-2XP - Manual (Page 15)

Expansion Modules
14
XEM-2XT Dual 10G BASE-T RJ-45 Ports
The XEM-2 XT Dual 10 GBASE-T RJ-45 expansion module features:
■ two 10GBASE-T RJ-45 ports
■ LEDs showing port status
Front view XEM-2 XT
The following LEDs report operations and faults on the XEM-2XT.
Caution It is recommended that you should wait 30 seconds between hot
swapping any XEM to resume normal operations. Also ensure the XEM
fastening thumbscrews are fully tightened. If you are unsure about correct
procedures, contact your authorised Allied Telesis distributor or reseller.
LED State Description
L/A
(Link Activity)
Green A 10 Gbps link has been established.
Green flashing 10 Gbps activity is occurring.
Off A link has not been established.
XEM-2XT
L/A
L/A 10G LINK ACT
L/A 1 2
XEM_IG.fm Page 14 Monday, July 19, 2010 10:40 AM