Remote control, About symbols – Aiwa XD-DV270 User Manual
Page 17
![background image](/manuals/42661/17/background.png)
ENGLISH
17
PREP
ARA
TIONS
En
Installing batteries
Detach the battery cover on the rear of the remote control,
and insert two R6 (size AA) batteries with 0 and 9 aligned
correctly .
When to replace the batteries
The maximum operational distance between the remote
control and the sensor of the units should be approximately
7 meters. If this distance decreases, replace the batteries
with new ones.
NOTES
• When operating with the remote control, point the top of
the remote control toward the player
.
• If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the
unit is exposed to intense light, such as direct sunlight.
- There is fluorescent lighting near the remote sensor in
the display window .
- Other remote controls are used nearby (those of a TV
set, etc.).
REMOTE CONTROL
Although this unit can play DVDs, super video CDs, V
ideo
CDs, Audio CDs or MP3 discs, some of the functions are
restricted by the kinds of discs.
In this operating instructions, the following symbols are used
to make distinction.
:
Shows the function or the display for only
DVDs.
:
Shows the function or the display for only super
video CDs.
:
Shows the function or the display for only video
CDs.
:
Shows the function or the display for only
audio CDs.
:
Shows the function or the display for only MP3
discs.
No symbols: The function works in common.
About the
symbol display
• The
symbol will be displayed on TV screen if you
press a button which cannot be used or enter an incorrect
number.
• Some discs may have places where they do not allow
pressing of the STOP, SKIP, or other buttons. The
mark will be displayed on the screen if you press a button
that is not allowed in such a place.
ABOUT SYMBOLS