beautypg.com

Connecting to an antenna, Plug & play (initial setup) – Samsung LE32D400E1W User Manual

Page 5

background image

English - 5

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

Preset: Connecting the mains and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWER

P button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the Red button.

1

Selecting a language

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the desired OSD (On Screen Display) language.

P

POWER

2

Selecting Store Demo
or Home Use

Press the

◄ or ► button, then press the

ENTER

E button.

Select the Home Use mode. Store Demo mode is for retail
environments.
To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold

MENU

for 5 sec.

Store Demo is only for shop display. If you select it, several functions
are not able to use. Please select Home Use when you watch at home.

3

Selecting a country

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the appropriate country.

After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.

When you input the PIN number, 0-0-0-0 is not available.

The option may differ depending on country.

4

Setting the Clock
Mode

Set the Clock Mode automatically or manually.
Auto: Select the time zone where you are located. (depending on the country)
Manual: Allows you to manually set the current date and time.

5

Selecting an antenna

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the desired broadcasting signal.

6

Selecting a channel

Press the

▲ or ▼ button, then press the

ENTER

E button.

Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel

→ Auto Tuning.

Press the

ENTER

E button at any time to interrupt the memorisation process.

7

Enjoy your TV.

Press the

ENTER

E button.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play (

MENU

→ System) again at home although you did in shop.

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”:

MUTE

→ 8 → 2 → 4 →

POWER

(on).

VHF/UHF Antenna

Cable

or

TV Rear Panel

The position of power input port
may differ depending on the model.

[LCD-XC]BN68-03717A-L04.indb 5

2011-04-28 �� 3:16:06